Stainless steel cable float ball level switch function:

1. Water and electricity industry: water level control and alarm of collecting well, cleaning well, top drain, living water tower, storage tank and front pool;

2, water supply and drainage industry: water plant mixing pool, sand filter tank, sedimentation tank, water intake, water storage tank, water tower water level alarm and control;

3. The water level control and alarm of the digestion tank, the balance tank, the sewage tank, the aeration tank, the bar pollution grid and the concentration tank of the sewage treatment plant.

The performance characteristics of

The stainless steel cable float level switch is a control device that adjusts the level of the liquid in the bucket, tank or well. It can be automatically adjusted, easy to operate, easy to install, safe and reliable, free from maintenance. It has a resistance to sewage, widely used in homes, factories, mines and other pools, oil, acid and alkali pools, barrels, tanks, irrigation and other containers. If you connect two controllers. One is put into the water tower, the other is put into the well to control the pump, which can prevent the damage to the pump equipment due to the lack of water to open the empty pump; You can also have three controllers in series, one put to the water tower, another filter tank and one put to the river (well) can control at the same time, can prevent the water shortage of empty pump and damage to the pump equipment; Three controllers can also be connected in series, with one placed in the river (well) to control two pump equipment at the same time.

Float level controller. Technical parameters

1. Working voltage: 220V.

2. Working current: 8A.

3, working temperature: -10 ~ 120℃.

4. Electrical life: 1×100000 times.

5, mechanical life: 5×100000 times.

6, lead length: 3m 4m 5m 10m and other special length and materials can be customized

3. Installation method

1. Use black and blue wires

When the float ball is on the liquid level, the contact point is not in the state. When the float ball is on the liquid level, the contact point is in the state of being put on.

2. Use black and yellow wires

When the float ball is on the liquid level, the contact point is in the open state. When the float ball is on the liquid level, the contact point is not in the open state.

3, the installation of the fixed hammer

The control height of the liquid level is determined by the length of the cable of the floating ball level switch in the liquid and the position of the heavy hammer in the cable. The method to fix the cable floating ball level switch hammer is to remove the hammer from the non-bell end of the clamp ring, set it in the appropriate position of the cable, and then put the cable through the hammer horn end, set the clamp on the cable to limit the position of the hammer. Finally, fix the cable in an appropriate place outside the container.